Marine industry CNC Angle Drilling Systems
Steel Matters, CNC Machine Thinker
——Quality assurance + After-sales service
Product Showing
| 1. Machine Gearing | |
| (1)Reducer |  |
| (2)Rack Gear Pinion |  |
| (3)Ball Screw |  |
| (4)Linear Guide |  |
| 2. Machine System | |
| (1)CNC system(Optional) | |
| SIEMENS system | LYNUC system |
 |  |
| KND system | SYNTEC system |
 |  |
| (2)Lubrication system | |
 |  |
| (3)Chip collection | |
 |  |
| 3.Processing Show | |
| Drilling | Milling |
 |  |
| Tapping | Screwing |
 |  |
| Drilling Head | |
 |  |
 |  |
| Control System (optional) | |
 |  |
| Chip removal system | Lubricationl system |
 |  |
| Workpiece show | |
 |  |
 |  |
 |  |
| Knife Rest (optional) | |
 | |
| Electrical systemotary | |
 |  |
(only for for reference )
Product Parameter
NO. | Name | Unit | JX3540 |
1 | Angle Size | mm | 140X140X10-350X350X40 |
2 | Max diameter of hole | mm | 40 |
3 | Marking force | kN | 1030 |
4 | Group of Marking | Pcs | 4 |
5 | Dimension of letter | Pcs | 15x15mm (100T print machine) |
6 | Number of prefixes per group | Pcs | 15 |
7 | Number of drilling units | Pcs | 2 |
8 | Number of drills per unit | Pcs | 3 |
9 | Spindle speed | r/min | 180-560 |
10 | Diameter of drilling | mm | 12-40 |
11 | Back mark range | mm | 40-220 |
12 | Max length of blank pieces on feed | mm | 14000 |
13 | Max length of work piece on discharge | mm | 12000 |
14 | Number of NC axes that can be positioned | Pcs | 3 |
15 | Feeding mode | Reducer driven flip material claw flip feeding | |
16 | Feeding speed | Adjustable manually |
FAQ:
1. Where is the main factory?
CHENGDONG INDUSTRIAL PARK, SHUANGSHAN STREET OFFICE OF ZHANGQIU, JINAN, SHANDONG, CHINA.
2. Battery replacement procedure
(1) Make sure the input power is turned off and the power of the replaced drive unit is turned off.
(2) Pull out the battery plug connected to the battery socket of the drive unit.
(3) Press the side of the battery with your fingertip, push the battery horizontally and remove it.
(4) The plug of the new battery is connected to the battery socket of the drive unit.
(5) Install the battery on the drive unit.
