ALBHD1500/3A Workpiece Movable Beam Drilling Machine(High Speed)

Machine structure and configuration 

1. Machine is mainly composed of bed, CNC slide table(three pcs), drilling spindle box (three pcs), clamping device, detection device, cooling system, chip etc.

2. The bed is square steel tubes welded together and done strengthen to  the larger force structure of the bed, the completion of the weld artificial aging treatment, which ensure the stability of the bed well, thus ensure the accuracy of the entire machine.

3. Three pcs of CNC slide tables, respectively , located in fixed side , moving side and middle . with same structure , all composed of slide plate, slide, and servo driving system. Three sliding stage have a total of six CNC axes, including three CNC feeding axes and three CNC positioning axes, each of them adopts precision linear rolling guide , driven by AC servo motor & ball screw, which ensure the positioning accuracy well.

4. Equipped with three pcs of drilling spindle boxes , respectively, installed on the three CNC sliding table, do drilling of horizontal and vertical directions.  Each drill spindle box can drill independently ,also can drill at the same time .

5. Spindle adopts precision spindle, high-precision rotation ,high rigidity . Equipped with BT40 taper, tool change easily , can clamp twist drill and carbide drill bit, with large application scope. The spindle adopts variable frequency control motor driving , for a wide range of using . Rotation speed is stepless adjustment, in large range, to meet variable rotation speed demand .

6. The machine is equipped with three sets of in-line tool changers, one set of tool changer with 4 tools, automatic tool change functions, high degree of automation. Enables drilling, tapping, light milling, marking and other functions.

7. Work piece fixing adopts hydraulic clamping, total with five hydraulic cylinders, do horizontally clamping and vertical clamping separately. Horizontally clamping is composed of fixed side datum and moving side clamp , the fixed side datum keep fixing, moving side clamping move slide table driven by a large cylinder, the linear guide guiding ,moving to the fixed side to realize workpiece horizontally clamping ; the vertical clamps , install on the fixed side and moving side , 2 pcs on each side , do up and down moving on four space through relative cylinder drive the lever. To do vertical clamping for workpiece.

8. This machine is equipped with work piece width detection and web height detection device, which can effectively compensate the deformation of the work piece to ensure processing  accuracy; The two detection devices both adopt wire-actuated encoders, easy installation.

9. Adopts trolly feeding, driven by servo motor via reducing the speed through gear and rack . Equipped with laser alignment device, can detect work piece when workpiece feeding , then do feedback ,to realize workpiece precision positioning .

10. Cooling systems:  Adopt atomization cooling ,with the function of inner and outer cooling , each drill spindle box all equipped with outer cooling nozzle and inner cooling pipe joint, which can be chosen as per drilling demand , and be using  or simultaneously.

11.  Chip : Adopt swivel caster as guide, carry easily.

Main Technical Parameters

1 Workpiece

1.1 H Beam.  Height of section  H:150-1500mm    Wing width B:80-800mm

1.2 U Beam   Height of section H:150-1500mm    Wing width B:50-400mm

1.3 Square Steel:  Width：    150～1500mm      Heigh：      50～400mm

1.4 Steel Angle：   LXL：      150～800mm

1.5 Maximum thickness of workpiece :   60mm

2 Drilling power box:

2.1 Quantity :                         3

2.2 Maximum drilling dia.        ￠40mm

2.3 Spindle taper :              BT40

2.4 Motor power of spindle ：   3x11 kw

2.5 Spindle rotation speed (stepless adjustment)  30-3000r/min

3. Tool changer

3.1 quantity :   3

3.2 tools quantity: 3x4

4 CNC Axes:

4.1 Quantity:                  7+3(Spindle servo)

4.2 For fixed ,moving ,mid side

Feeding servo motor power : 3x2 kw

Positioning servo motor power : 3x2 kw

4.3 Moving speed of three position CNC axes: 0-10m/min

Moving speed of three feeding CNC axes :   0-5m/min

4.4  Width detection stroke :   1350mm

Web detection stroke: 320mm

5 Feeding dolly:

5.1  Servo motor power :  5kw

5.2  Maximum feeding speed :    20m/min

5.3  Maximum feeding weight  12t

6. In /out feeding path

6.1 Through Max. Workpiece length:   12 m   as buyer’s request

6.2 Through Max. Web of workpiece: 1500mm

7.  Atomizing cooling system

7.1  Nozzle quantity:    3

    Pressure of compressed air:    0.5MPa

7.2  Cooling method :   inner & outer cooling

8.  Host machine overall dimension (L x W x H) :       about 6.5x1.6x3.5m

9.  Host machine weight :           about 19000 kg

IV.  Main outsourcing components 

Note: The above is fixed supplier. If the supplier could not supply the components in case of any special matters, we will adopt same level components ,but the quality is no worse than the above.

V.  Accessories and spare parts list

VI.  Working environment

    1. Working power: Three phase four wire system 380±10%V    50±1HZ

    2. Working temperature：                   0°C-40°C

    3. Humidity of environment：                 ≤75%

Milling, boring, drilling and tapping all these processes can be made in one clamping and improves production efficiency and machining quality.

Fully protective CNC machine tool with single swing head on the slider and CNC rotary table. 5 axis linkage, machine precision operation and reduction of labor input.

ALLES is a manufacturer of CNC machine tools and a thinker of CNC machine tools. Since its inception, ALLES has achieved rapid and stable development. ALLES products are divided into eight categories: CNC Machine Center, CNC Milling Machine, CNC Drilling Machine, CNC Boring and Milling Machine, CNC Sawing Machine, CNC Grinding Machine, CNC Punching Machine, CNC Turning and Milling Machine,,, Excavators, Forklifts And road machinery, a total of more than 130 models. Complete warehousing services and post-warranty.