ALBHD750 Workpiece Movable Beam Drilling Machine is mainly used for h-beam, channel steel, Angle steel and plate drilling and marking processing, widely used in building, bridge, tower mast and rack etc, such as high precision, easy to operate, is an essential part of quality assurance in steel structure manufacturing efficient equipment.
ALBHD750 Workpiece Movable Beam Drilling Machine is mainly used for h-beam, channel steel, Angle steel and plate drilling and marking processing, widely used in building, bridge, tower mast and rack etc, such as high precision, easy to operate, is an essential part of quality assurance in steel structure manufacturing efficient equipment.
Main Technical Parameters
| Name | Unit | ALBHD750 | Remark | |
| Range of Workpiece | H Beam | mm | 150x80-1000x500 | |
| Thickness | mm | ≤80 | ||
| Length | m | 15 | By client request | |
| Drill Power Box | Number | piece | 3 | |
| Range of Diameter | mm | ￠12.5～￠33.5 | ||
| Rotation of Spindle | r/min | 180～560 | ||
| Taper of Spindle | #3 and #4 Morse taper hole | Can turn into#2 | ||
| Motor Power of Spindle | KW | 3x11 | ||
| CNC Axes | Qty | piece | 3 | |
| Servo Motor Power of Fixed Side, Moving Side and the Middle in-feeding Axis | KW | 3×2.0 | ||
| Servo Motor Power of Fixed Side, Moving Side and the Middle Positioning Axis | KW | 3×2.0 | ||
| Moving Speed of Three Position CNC Axes | m/min | 0～10 | ||
| Moving sSpeed of Three in-feeding CNC Axes | m/min | 0～5 | ||
| Stroke width detection | mm | 5 | ||
| Stroke Webs Detection | mm | 20 | ||
| In-feed Trolley | Servo Motor Power of in-feed Trolley | KW | 22 | |
| Max .in-feed Speed | m/min | 0.4 | ||
| Cooling sSystem | Number of Nozzles | 3 | ||
| Compressed Air Pressure | Mpa | ≥0.5 | ||
| Cooling Method | Inner+outside | |||
| Host Dimension(L*W*H) | m | About 4400x2400x3500 | ||
| Host Weight | Kg | About 7000 | ||
Three-point control CNC axis, one CNC detection axis and three drilling spindles with variable frequency stepless speed change, PLC control, with high precision and convenient operation, are the guarantee of quality in steel structure manufacturing. Less efficient equipment. The H-shaped steel three-dimensional drill is fixed by the bed, the workpiece is movable structure, and the bed is welded by steel plate with sufficient strength. The three-dimensional drilling of this structure is suitable for the processing of medium and small H-shaped steel, which is convenient for continuous production and automation. high.
1. Battery replacement procedure
(1) Make sure the input power is turned off and the power of the replaced drive unit is turned off.
(2) Pull out the battery plug connected to the battery socket of the drive unit.
(3) Press the side of the battery with your fingertip, push the battery horizontally and remove it.
(4) The plug of the new battery is connected to the battery socket of the drive unit.
(5) Install the battery on the drive unit.
2. Warranty: 12 months
3. What brand is the CNC system?
SIEMENS system; FANUC system; Shanghai LYNUC system; Taiwan China SYNTEC system to meet your requirements.
3.The three power heads can be drilled at the same time, and the power head is drilled by self-controlled stroke.
4.It is not necessary to set the thickness of the workpiece and the length of the drill bit, and it automatically performs fast-forward and work-in conversion, and the machining efficiency is high.
