ALCPD300x3000 wind power cantilever drilling machine working table is made of cast iron HT250 structure. It is finish milling and flat. It can be used to fix workpieces. It can also be equipped with pneumatic fixture. It is more convenient and fast to fix workpieces.
|The largest processing workpiece size||Length × diameter||mm||3000×300|
|Maximum thickness of workpece||220|
|Vertical ram-type drilling power head||Qty.||PCS||1|
|Variable frequency spindle motor||KW||3.7|
|Distance between the lower end face of spindle and the center of chuck||mm||200-600mm|
|Workpiece rotation axis (Y axis)||Diameter range||mm||3000|
|X-axis moving speed||m/min||0~9|
|X-axis servo motor power||KW||2.4|
|Power head moves vertically (X axis)||Maximum travel||mm||300|
|Y-axis movement speed||m/min||0~8|
|Y axis servo motor power||KW||2.4*1|
|Vertical ram feed motion (Z axis)||Maximum travel||mm||370|
|Z-axis movement speed||m/min||0~8|
|Z axis servo motor power||KW||1 × 2.4 brake|
|Three-axis positioning accuracy||X/Y/Z||mm||±0.05/300|
|Three-axis repeat positioning accuracy||X/Y/Z||mm||±0.025/300|
|Machine dimension||Length × width × height||mm||4200*1550*1800|
|Gross weight||t||(about) 6|
The maximum load of worktable is 1 ton. Two rolling linear guide pairs and precision screw with super high bearing capacity are installed vertically on the upper left side of the bed and on the side.
1. Wipe the machine's appearance, cover and accessories to achieve internal and external cleaning, no rust, no yellow robe.
2. Wipe the screw, rack and bevel gear.
3. Check the replacement screws, nuts, handles (balls), oil cups, etc.