ALCPD300×2000 Fully Automatic Cantilever Drilling Machine

ALCPD300×2000 Fully Automatic Cantilever Drilling Machine bed is made of steel structure, the main frame is made of steel structural parts, the internal stress is removed by artificial aging heat treatment, and the dynamic and static rigidity is good and it is not deformed. The working surface is made of cast iron HT250, and the smooth and smooth workbench is used to clamp the workpiece. It can also be equipped with pneumatic clamps. Clamping the workpiece is more convenient and quicker.

Product Details

1

ALCPD300×2000 Fully Automatic Cantilever Drilling Machine bed is made of steel structure, the main frame is made of steel structural parts, the internal stress is removed by artificial aging heat treatment, and the dynamic and static rigidity is good and it is not deformed. The working surface is made of cast iron HT250, and the smooth and smooth workbench is used to clamp the workpiece. It can also be equipped with pneumatic clamps. Clamping the workpiece is more convenient and quicker.Fully automatic cantilever drilling machine PRODUCT PARAMETER

Main Technical Parameters

ItemUnitALCPD300×2000
The largest processing workpiece sizeLength × diametermm2000×300
Maximum thickness of workpece220
Vertical ram-type drilling power headQty.PCS1
Spindle taper
BT40
drilling diametermmΦ1-Φ30
Tapping diametermmM3-M16
Spindle speedr/min30~3000
Variable frequency spindle motorKW3.7
Distance between the lower end face of spindle and the center of chuckmm200-600mm
Workpiece rotation axis (Y axis)Diameter range mm5000
X-axis moving speedm/min0~9
X-axis servo motor powerKW2.4
Power head moves vertically (X axis)Maximum travelmm300
Y-axis movement speed m/min0~9
Y axis servo motor powerKW2.4*1
Vertical ram feed motion (Z axis)Maximum travelmm370
Z-axis movement speed m/min0~8
Z axis servo motor powerKW1 × 2.4 brake
Three-axis positioning accuracyX/Y/Zmm±0.05/300
Three-axis repeat positioning accuracyX/Y/Zmm±0.025/300
Machine dimensionLength × width × heightmm3770*1500*2300
Gross weight t(about) 3.5

Fully automatic cantilever drilling machinePRODUCT FEATURE AND APPLICATION

Drilling power head adopts special servo spindle motor, which drives special precision spindle through tooth synchronization, realizes variable frequency stepless speed change, and feeds are driven by servo motor and ball screw. X-axis and Y-axis can be linked and semi-closed-loop control is adopted to realize linear and arc interpolation functions. The spindle end is BT40 taper hole clamping drill or milling cutter, which has higher precision, realizes high-speed cutting, configures pneumatic tool changer function, and can choose bucket hat type tool library with eight tool library capacity. Tool replacement is easier, and the degree of automation of free manpower processing is higher.

ALLES CNC-2

faq

a291c868dd51eb85e51f96201eb08b0

FAQ

Drive and rail maintenance

(1) Check and adjust each transmission component to repair or replace worn parts.

(2) Check and adjust the bearing clearance of the main shaft, remove the burr from the tapered hole, check the wear of the gear in the gearbox and the transfer box, and whether there is noise during the operation of the bearing. If there is damage, replace it and adjust the main shaft so that the amount of turbulence is Within the prescribed range.

(3) Check and adjust the clamping mechanism, and the positioning of each joystick is accurate.

(4) After checking the guide rails, remove the burrs, repair the scratches, and adjust the gap.

Fully automatic cantilever drilling machine Contact us


Inquiry