CNC circular tube clamping drilling machine

CNC circular tube clamping drilling machine for metal pipe including bed body, for circular tube clamping rotation mechanism and for circular tube moving engraving mechanism;

Product Details

CNC circular tube clamping drilling machine

ALPD2020-2 CNC circular tube clamping drilling machine for metal pipe including bed body, for circular tube clamping rotation mechanism and for circular tube moving engraving mechanism; the bed body adopts a rectangular parallelepiped frame structure, and the left and right end sides of the bed side wall are installed There is a fixing block, a first ball screw is connected between the fixing blocks, and a first motor for driving the first ball screw is mounted on the fixing block at the left end, and the two frames of the bed are provided The first linear guide rail is further provided with a second linear guide rail on the inner side of the first linear guide rail, and at least two screw lifts are slidably disposed on the second linear guide rail, and the screw lifter is provided with a plurality of rolling wheels.

VIDEO

CNC circular tube clamping drilling machine

Main Technical Parameters

ItemUnitALPD2020-2
Maximum workpiece sizeWXLmm200×2000
Maximum thickness of workpece≤ 5mm
Vertical pillow drilling power headQty.PCS1
Spindle taper
BT40
drilling diametermmΦ2-Φ26
Spindle speedr/min30~1500
Variable frequency spindle motorKW2.2
Distance between the lower end face of spindle and the center of chuckmm150-400
Workpiece rotation axis (Y axis)Diameter rangemm20-200
X-axis moving speedm/min0~9
X-axis servo motor powerKW750*1
Power head moves vertically (X axis)Maximum travelmm2000
Y-axis movement speed m/min0~9
Y axis servo motor powerKW2.3
Vertical ram feed motion (Z axis)Maximum travelmm250
Z-axis movement speedm/min0~8
Z axis servo motor powerKW1×2.3 band-type brake
Three-axis positioning accuracyX/Y/Zmm±0.05/300
Three-axis repeat positioning accuracyX/Y/Zmm±0.025/300
Machine dimensionLength × width × heightmm3200×1250×180
Gross weightt(about)2

CNC circular tube clamping drilling machine

Transmission and guide

1. Check and adjust each transmission component to repair or replace worn parts.

2. Check and adjust the bearing clearance of the main shaft, remove the burrs from the taper hole, check the gear wear in the gearbox and the transfer box, and the noise in the bearing 3. during operation. If there is damage, replace it, adjust the spindle to make the turbulence Within the prescribed range.

4. Check and adjust the clamping mechanism, and the positioning of each joystick is accurate.

5. After checking the guide rails, remove the burrs, repair the scratches, and adjust the gap.

CNC circular tube clamping drilling machine

CNC circular tube clamping drilling machine

CNC circular tube clamping drilling machine

CNC circular tube clamping drilling machine

SHANDONG ALLES ENERGY TECHNOLOGY CO.,LYD

Web:www.allescncmachine.com

Factory360° View:http://vr.yilanquanjing.com/shanyishukongen/


Lily

Whatsapp:+86 159 6660 2397

Email:info@sdalles.com

底



Inquiry