ALPZ3016(Standard) gantry movable type high speed plate drilling machine in China

ALPZ3016(Standard) gantry movable type high speed plate drilling machine in China workpiece hole position can be automatically generated by the keyboard or CAD graphic input. It has the function of pre-drilling hole position preview and rechecking, which is easy to operate. The machine has good rigidity and high stability to ensure long-term work.

Product Details

3

ALPZ3016(Standard) gantry movable type high speed plate drilling machine in China workpiece hole position can be automatically generated by the keyboard or CAD graphic input. It has the function of pre-drilling hole position preview and rechecking, which is easy to operate. The machine has good rigidity and high stability to ensure long-term work.

 AL5VMC700 CHINA 5 Axis automatic CNC Machine 1

 AL5VMC700 CHINA 5 Axis automatic CNC Machine 2

Main Technical Parameters

 

ItemUnitALPZ3016
Worktable Size of worktable (WxL) mm3000×1600
Load - bearing of worktablet/m²7
T-slot widthmm24
Vertical ram type
Power Head
QuantityPCS2Standard
Spindle taper hole
Morse #4
Max. drilling diametermmΦ100
Drilling depth / drilling diameter
≤5(Can be controlled buy
program if over)
Spindle speed r/min30—560Standard
Dedicated frequency conversion motor powerkw11Standard
Spindle max. torqueNm350Standard
The distance of spindle nose to worktablemm250-650Standard
Longitudinal movement of the gantry(X-axis)Maximum travelmm3000-24000
X-axis moving speedm/min0-10
X-axis servo motor powerkw2
Power head transverse movement
(Y-axis)
Maximum travelmm3000
Y-axis movement speed m/min0-10
Y axis servo motor powerkw2
Vertical ram feed motion
(Z axis)
Maximum travelmm350
Z-axis moving speedm/min0-5
Z axis servo motor powerkw2
Positioning precisionX-axismm0.06/2000
Y-axis0.08/ Full length
Re-positioning precisionX-axismm0.03/2000
Y-axis0.03/2000
Total motor powerKW About 40

 AL5VMC700 CHINA 5 Axis automatic CNC Machine 3

The plane drilling pneumatic system mainly blows the center of the spindle and cleans the spindle cone. Gas is blown in from the front end of the spindle to prevent dust from entering the inside of the spindle unit.

Pneumatic maintenance

1. Remove impurities and moisture from compressed air; 2. Check the oil supply of the oil mister in the system; 3. Maintain the tightness of the system; 4. Pay attention to adjust the working pressure; 5. Clean or replace the pneumatic components and filter elements.

001

002

为什么选择ALLES

a291c868dd51eb85e51f96201eb08b0

 AL5VMC700 CHINA 5 Axis automatic CNC Machine Deliver goods


Inquiry