High speed steel structure gantry type drilling machine,With the electronic handwheel control, when the first hole is set to the feed position, the other holes of the same type can be drilled to realize the procedure of fast forward → work forward → fast reverse.
ALPZ4040(T-slot) High speed steel structure gantry type drilling machine,With the electronic handwheel control, when the first hole is set to the feed position, the other holes of the same type can be drilled to realize the procedure of fast forward → work forward → fast reverse. Therefore, a large amount of time is saved during the processing, the production efficiency is greatly improved, and automatic chip breaking, chip retreat, pause, broken bit protection, and manual hole jumping function are also provided. The position accuracy and drilling efficiency of the hole are greatly improved, and the drilling automation is realized.
Main Technical Parameters
Item | Unit | ALPZ4040 | |
Worktable | Size of worktable (WxL) | mm | 4000×4000-24000 |
Load - bearing of worktable | t/m² | 7 | |
T-slot width | mm | 28 | |
Vertical ram type Power Head | Quantity | PCS | 2Standard |
Spindle taper hole | Morse #4 | ||
Max. drilling diameter | mm | Φ100 | |
Drilling depth / drilling diameter | ≤5(Can be controlled buy program if over) | ||
Spindle speed | r/min | 30—560Standard | |
Dedicated frequency conversion motor power | kw | 11Standard | |
Spindle max. torque | Nm | 350Standard | |
The distance of spindle nose to worktable | mm | 250-650Standard | |
Longitudinal movement of the gantry(X-axis) | Maximum travel | mm | 4000-24000 |
X-axis moving speed | m/min | 0-10 | |
X-axis servo motor power | kw | 2 | |
Power head transverse movement (Y-axis) | Maximum travel | mm | 4000 |
Y-axis movement speed | m/min | 0-10 | |
Y axis servo motor power | kw | 2 | |
Vertical ram feed motion (Z axis) | Maximum travel | mm | 350 |
Z-axis moving speed | m/min | 0-5 | |
Z axis servo motor power | kw | 2 | |
Positioning precision | X-axis | mm | 0.06/2000 |
Y-axis | 0.08/ Full length | ||
Re-positioning precision | X-axis | mm | 0.03/2000 |
Y-axis | 0.03/2000 | ||
Total motor power | KW | About 40 |
The vertical ram is a cast structure. The Z-axis movement adopts two linear roller guides, and the drive adopts AC servo motor to drive the timing belt and the precision home ball screw drive. The plane drilling pneumatic system mainly blows the center of the spindle and cleans the spindle cone. Gas is blown in from the front end of the spindle to prevent dust from entering the inside of the spindle unit.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
SHANDONG ALLES ENERGY TECHNOLOGY CO.,LYD
Factory360° View:http://vr.yilanquanjing.com/shanyishukongen/
Lily
Whatsapp:+86 159 6660 2397
Email:info@sdalles.com