The Gantry type CNC drilling machine spindle speed is 30 to 560 r/min and the speed range is wide. The position accuracy and drilling efficiency of the hole are greatly improved, and the drilling automation is realized.
ALPZ5050(T-slot) China gantry type drilling machine, drilling power box is developed by our company. It is especially good at drilling large holes, with high efficiency and high precision. The main shaft is driven by a high-power dedicated variable frequency motor through a timing belt. The spindle speed is 30 to 560 r/min and the speed range is wide. The position accuracy and drilling efficiency of the hole are greatly improved, and the drilling automation is realized.
VIDEO
Main Technical Parameters
Item | Unit | ALPZ5050 | |
Worktable | Size of worktable (WxL) | mm | 5000×5000-24000 |
Load - bearing of worktable | t/m² | 7 | |
T-slot width | mm | 28 | |
Vertical ram type Power Head | Quantity | PCS | 2Standard |
Spindle taper hole | Morse #4 | ||
Max. drilling diameter | mm | Φ100 | |
Drilling depth / drilling diameter | ≤5(Can be controlled buy program if over) | ||
Spindle speed | r/min | 30—560Standard | |
Dedicated frequency conversion motor power | kw | 11Standard | |
Spindle max. torque | Nm | 350Standard | |
The distance of spindle nose to worktable | mm | 250-650Standard | |
Longitudinal movement of the gantry(X-axis) | Maximum travel | mm | 5000-24000 |
X-axis moving speed | m/min | 0-10 | |
X-axis servo motor power | kw | 2 | |
Power head transverse movement (Y-axis) | Maximum travel | mm | 5000 |
Y-axis movement speed | m/min | 0-10 | |
Y axis servo motor power | kw | 2 | |
Vertical ram feed motion (Z axis) | Maximum travel | mm | 350 |
Z-axis moving speed | m/min | 0-5 | |
Z axis servo motor power | kw | 2 | |
Positioning precision | X-axis | mm | 0.06/2000 |
Y-axis | 0.08/ Full length | ||
Re-positioning precision | X-axis | mm | 0.03/2000 |
Y-axis | 0.03/2000 | ||
Total motor power | KW | About 40 |
Strictly observe the operating procedures and daily maintenance system; 2. Prevent dust from entering the numerical control device: floating dust and metal powder may cause the insulation resistance between components to drop, thereby causing malfunction or even damage to components; Regularly clean the cooling and ventilation system of the CNC cabinet.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
SHANDONG ALLES ENERGY TECHNOLOGY CO.,LYD
Factory360° View:http://vr.yilanquanjing.com/shanyishukongen/
Lily
Whatsapp:+86 159 6660 2397
Email:info@sdalles.com