ALPZ5050 CNC Wind Power Plate Drilling Machine main shaft is driven by a high-power dedicated variable frequency motor through a timing belt. The spindle speed is 30 to 560 r/min and the speed range is wide. It is mainly used for the processing of flanges, heat exchangers and tube sheets. The machining process is numerically controlled, with high efficiency, high precision, convenient programming and simple operation.
|Worktable||Size of worktable (WxL)||mm||5000×5000-24000|
|Load - bearing of worktable||t/m²||7|
|Vertical ram type|
|Spindle taper hole||Morse #4|
|Max. drilling diameter||mm||Φ100|
|Drilling depth / drilling diameter||≤5(Can be controlled buy |
program if over)
|Dedicated frequency conversion motor power||kw||11Standard|
|Spindle max. torque||Nm||350Standard|
|The distance of spindle nose to worktable||mm||250-650Standard|
|Longitudinal movement of the gantry(X-axis)||Maximum travel||mm||5000-24000|
|X-axis moving speed||m/min||0-10|
|X-axis servo motor power||kw||2|
|Power head transverse movement|
|Y-axis movement speed||m/min||0-10|
|Y axis servo motor power||kw||2|
|Vertical ram feed motion |
|Z-axis moving speed||m/min||0-5|
|Z axis servo motor power||kw||2|
|Y-axis||0.08/ Full length|
|Total motor power||KW||About 40|
1. Battery replacement procedure
(1) Make sure the input power is turned off and the power of the replaced drive unit is turned off.
(2) Pull out the battery plug connected to the battery socket of the drive unit.
(3) Press the side of the battery with your fingertip, push the battery horizontally and remove it.
(4) The plug of the new battery is connected to the battery socket of the drive unit.
(5) Install the battery on the drive unit.
2. Warranty: 12 months
3. What brand is the CNC system?
SIEMENS system; FANUC system; Shanghai LYNUC system; Taiwan China SYNTEC system to meet your requirements.