CNC high speed plate drilling machine ball screw pair, linear guide pair, electrical parts, servo motor and inverter of the machine tool are all supplied by well-known domestic and foreign manufacturers, and there are few startup failures.
ALPZ2020(Standard) ALLES CNC high speed plate drilling machine ball screw pair, linear guide pair, electrical parts, servo motor and inverter of the machine tool are all supplied by well-known domestic and foreign manufacturers, and there are few startup failures. The machine has good rigidity and high stability to ensure long-term work.
VIDEO
Main Technical Parameters
Item | Unit | ALPZ2020 | |
Worktable | Size of worktable (WxL) | mm | 2000×2000 |
Load - bearing of worktable | t/m² | 7 | |
T-slot width | mm | 24 | |
Vertical ram type Power Head | Quantity | PCS | 2Standard |
Spindle taper hole | Morse #4 | ||
Max. drilling diameter | mm | Φ100 | |
Drilling depth / drilling diameter | ≤5(Can be controlled buy program if over) | ||
Spindle speed | r/min | 30—560Standard | |
Dedicated frequency conversion motor power | kw | 11Standard | |
Spindle max. torque | Nm | 350Standard | |
The distance of spindle nose to worktable | mm | 250-650Standard | |
Longitudinal movement of the gantry(X-axis) | Maximum travel | mm | 3000-24000 |
X-axis moving speed | m/min | 0-10 | |
X-axis servo motor power | kw | 2 | |
Power head transverse movement (Y-axis) | Maximum travel | mm | 3000 |
Y-axis movement speed | m/min | 0-10 | |
Y axis servo motor power | kw | 2 | |
Vertical ram feed motion (Z axis) | Maximum travel | mm | 350 |
Z-axis moving speed | m/min | 0-5 | |
Z axis servo motor power | kw | 2 | |
Positioning precision | X-axis | mm | 0.06/2000 |
Y-axis | 0.08/ Full length | ||
Re-positioning precision | X-axis | mm | 0.03/2000 |
Y-axis | 0.03/2000 | ||
Total motor power | KW | About 40 |
1. The vertical ram is a cast structure. The Z-axis movement adopts two linear roller guides, and the drive adopts AC servo motor to drive the timing belt and the precision home ball screw drive.
2. The plane drilling pneumatic system mainly blows the center of the spindle and cleans the spindle cone. Gas is blown in from the front end of the spindle to prevent dust from entering the inside of the spindle unit.
3. It can be operated by electronic handwheel. When the first hole is set to the feeding position, the other holes of the same kind can be drilled to realize the process of fast-forwarding and rewinding. Therefore, a large amount of time is saved during the processing, the production efficiency is greatly improved, and the automatic breaking, chipping, pause, broken bit protection, and manual hole jumping function are also provided.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
SHANDONG ALLES ENERGY TECHNOLOGY CO.,LYD
Factory360° View:http://vr.yilanquanjing.com/shanyishukongen/
Lily
Whatsapp:+86 159 6660 2397
Email:info@sdalles.com