ALPZ2040 Flat high-efficiency CNC drilling and milling machine electronic handwheel can be used for manipulation. When the first hole is set to the feed position, the remaining holes of the same type can be drilled to achieve the process of fast forward and rewind. Therefore, a large amount of time is saved during the processing, the production efficiency is greatly improved, and the automatic breaking, chipping, pause, broken bit protection, and manual hole jumping function are also provided.
ALPZ2040 Flat high-efficiency CNC drilling and milling machine electronic handwheel can be used for manipulation. When the first hole is set to the feed position, the remaining holes of the same type can be drilled to achieve the process of fast forward and rewind. Therefore, a large amount of time is saved during the processing, the production efficiency is greatly improved, and the automatic breaking, chipping, pause, broken bit protection, and manual hole jumping function are also provided.
VIDEO
Main Technical Parameters
| Item | Unit | ALPZ2040 | |
| Worktable | Size of worktable (WxL) | mm | 2000×4000 |
| Load - bearing of worktable | t/m² | 7 | |
| T-slot width | mm | 24 | |
| Vertical ram type Power Head | Quantity | PCS | 2Standard |
| Spindle taper hole | Morse #4 | ||
| Max. drilling diameter | mm | Φ100 | |
| Drilling depth / drilling diameter | ≤5(Can be controlled buy program if over) | ||
| Spindle speed | r/min | 30—560Standard | |
| Dedicated frequency conversion motor power | kw | 11Standard | |
| Spindle max. torque | Nm | 350Standard | |
| The distance of spindle nose to worktable | mm | 250-650Standard | |
| Longitudinal movement of the gantry(X-axis) | Maximum travel | mm | 3000-24000 |
| X-axis moving speed | m/min | 0-10 | |
| X-axis servo motor power | kw | 2 | |
| Power head transverse movement (Y-axis) | Maximum travel | mm | 3000 |
| Y-axis movement speed | m/min | 0-10 | |
| Y axis servo motor power | kw | 2 | |
| Vertical ram feed motion (Z axis) | Maximum travel | mm | 350 |
| Z-axis moving speed | m/min | 0-5 | |
| Z axis servo motor power | kw | 2 | |
| Positioning precision | X-axis | mm | 0.06/2000 |
| Y-axis | 0.08/ Full length | ||
| Re-positioning precision | X-axis | mm | 0.03/2000 |
| Y-axis | 0.03/2000 | ||
| Total motor power | KW | About 40 | |
CNC maintenance
1. Strictly observe the operating procedures and daily maintenance system;
2. Prevent dust from entering the numerical control device: floating dust and metal powder may cause the insulation resistance between components to drop, thereby causing malfunction or even damage to components;
3. Regularly clean the cooling and ventilation system of the CNC cabinet;
4. Frequently monitor the grid voltage of the CNC system: the grid voltage range is 85% to 110% of the rated value;
5. Regularly replace the memory battery;
6. Long-term maintenance of the CNC system: often powering the CNC system or running the drilling machine to run the temperature program; Maintenance of the standby board.
