ALPZ3030 Wind Power CNC High Speed Plane Drill

ALPZ3030 wind power CNC high-speed plane drilling machine tool is optimized by finite element analysis and calculation, which improves the rigidity of the machine tool so that the machine can perform drilling and milling and rigid tapping. Greatly improved processing efficiency and processing quality.

Product Details

5

ALPZ3030 wind power CNC high-speed plane drilling machine tool is optimized by finite element analysis and calculation, which improves the rigidity of the machine tool so that the machine can perform drilling and milling and rigid tapping. Greatly improved processing efficiency and processing quality.ALFDC Disc Flange Drilling Machine PRODUCT PARAMETER

Main Technical Parameters


ItemUnitALPZ3030
Worktable Size of worktable (WxL) mm3000×3000-24000
Load - bearing of worktablet/m²7
T-slot widthmm24
Vertical ram type
Power Head
QuantityPCS2Standard
Spindle taper hole
Morse #4
Max. drilling diametermmΦ100
Drilling depth / drilling diameter
≤5(Can be controlled buy
program if over)
Spindle speed r/min30—560Standard
Dedicated frequency conversion motor powerkw11Standard
Spindle max. torqueNm350Standard
The distance of spindle nose to worktablemm250-650Standard
Longitudinal movement of the gantry(X-axis)Maximum travelmm3000-24000
X-axis moving speedm/min0-10
X-axis servo motor powerkw2
Power head transverse movement
(Y-axis)
Maximum travelmm3000
Y-axis movement speed m/min0-10
Y axis servo motor powerkw2
Vertical ram feed motion
(Z axis)
Maximum travelmm350
Z-axis moving speedm/min0-5
Z axis servo motor powerkw2
Positioning precisionX-axismm0.06/2000
Y-axis0.08/ Full length
Re-positioning precisionX-axismm0.03/2000
Y-axis0.03/2000
Total motor powerKW About 40



ALFDC Disc Flange Drilling Machine PRODUCT FEATURE AND APPLICATION

The pneumatic system mainly blows the center of the spindle and cleans the taper hole of the spindle. Gas is blown in from the front end of the spindle to prevent dust from entering the inside of the spindle unit.

001

002

ALFDC Disc Flange Drilling MachineWin- win Cooperation

faq

Pneumatic maintenance

1. Remove impurities and moisture from compressed air;
2. Check the oil supply of the oil mister in the system;
3. Maintain the tightness of the system;
4. Pay attention to adjust the working pressure;
5. Clean or replace the pneumatic components and filter elements.

ALFDC Disc Flange Drilling Machine  Contact us


Inquiry