ALFDH1010 cnc high speed valve drilling machine,Equipped with an photoelectric edge finder, it is easy to find the position of the workpiece. Equipped with a hydraulic system to complete the hydraulic balance of the vertical ram and the spindle hydraulic loose knives. The numerical control console is installed on the gantry and can be moved longitudinally with the gantry for easy operation.
ALFDH1010 cnc high speed valve drilling machine,Equipped with an photoelectric edge finder, it is easy to find the position of the workpiece. Equipped with a hydraulic system to complete the hydraulic balance of the vertical ram and the spindle hydraulic loose knives. The numerical control console is installed on the gantry and can be moved longitudinally with the gantry for easy operation.
| Item | Unit | ALFDH1010 | |
| The largest processing workpiece size | Length × diameter | mm | 1000×1000 |
| The maximum thickness of the workpiece | 200 | ||
| Vertical ram-type drilling power head | Quantity | PCS | 1 |
| Spindle taper | BT40/BT50 | ||
| Drilling hole diameter | mm | Φ2-Φ26 | |
| Tapping range | M4-m36 | ||
| Spindle speed | r/min | 30~1500 | |
| Spindle motor power | kw | 11 | |
| Machine feed size: Width,Length, Height | mm | 1800*2000*380 | |
| Machine feed size: WidthLengthHeight | mm | 1800*2000*580 | |
| The distance of spindle nose to worktable | mm | 260-630/ 460-830optional | |
| Power head moves vertically (X axis) | Maximum travel | mm | 1000 |
| X-axis moving speed | m/min | 0~9 | |
| X-axis servo motor power | kw | 2.4*2 | |
| Workpiece rotation axis(Y axis) | Maximum travel | mm | 1000 |
| Y-axis movement speed | m/min | 0~9 | |
| Y axis servo motor power | kw | 2.4 | |
| Vertical ram feed motion (Z axis) | Maximum travel | mm | 650/800/1000/1300 |
| Z-axis moving speed | m/min | 0~8 | |
| Z axis servo motor power | kw | 1 × 2.3 brake | |
| Three-axis positioning accuracy | X/Y/Z | mm | ± 0.05 |
| Three-axis repeat positioning accuracy | X/Y/Z | mm | ± 0.025 |
It mainly blows the center of the spindle and cleans the spindle taper. Gas is blown in from the front end of the spindle to prevent dust from entering the inside of the spindle unit. The electronic handwheel can be used for manipulation. When the first hole is set to the feed position, the remaining holes of the same type can be drilled to achieve the process of fast forward and rewind.
