The Vertical Lathe machine can be used for turning, threading, profiling, milling and grinding with the help of additional devices. Compared with the horizontal lathe, the workpiece is clamped on the inside of the clamp decoration of the horizontal lathe.
The Vertical Lathe machine can be used for turning, threading, profiling, milling and grinding with the help of additional devices. Compared with the horizontal lathe, the workpiece is clamped on the inside of the clamp decoration of the horizontal lathe. The axis of the vertical lathe's spindle is vertically arranged, and the worktable surface is in a horizontal plane, so the clamping and alignment of the workpiece is more convenient. This layout reduces the load on the spindle and bearings, so the Vertical Lathe machine can maintain working accuracy for a long time.
Main Technical Parameters
|Capacity||Max. diameter swing over bed||mm||Φ630|
|Max. diameter swing over cross slide||mm||Φ350|
|Distance between centers||mm||1000|
|Width of bed way||mm||550|
|Max. load capacity||T||3|
|Spindle nose taper||-||Metric 120/ MT5|
|Spindle nose type||-||C11|
|Spindle speed steps||-||18 steps|
|Spindle speed range||rpm||7.5-1000|
|Chuck type||-||3-jaw manual|
|Turret||Turret type||-||Manual 4 position|
|Tool shank size||mm||30×30|
|Feed||X axis travel||mm||300|
|Z axis travel||mm||800|
|X axis feed grade/range||mm/r||64/0.05-12.15|
|Z axis feed grade/range||mm/r||64/0.1-24.3|
|X axis rapid traverse speed||mm/min||2300|
|Z axis rapid traverse speed||mm/min||4000|
|Metric thread grade/range||mm||50/1-240|
|Inch thread grade/range||T.P.I.||26/14-1|
|Module thread grade/range||mm||53/0.5-120|
|DP thread grade/range||D.P.||24/28-1|
|Tailstock||Tailstock quill diameter||mm||Φ100|
|Tailstock quill taper||-||MT5|
|Tailstock quill travel||mm||250|
|Motors||Main spindle motor||kW||11|
|Rapid traverse motor||kW||1.1|
|Coolant pump motor||kW||0.125|
|Dimensions||Width x Height||mm||1400×1450|
Maintenance of CNC Vertical Lathe machine system:
1. Strict compliance with operating procedures and routine maintenance systems.
2. Prevent dust from entering the electric control device. Floating dust and metal powder can easily cause the insulation resistance between electrical components to drop, which can cause failure or even damage components.
3． Regularly clean the cooling and ventilation system of the electric control cabinet.
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
SHANDONG ALLES ENERGY TECHNOLOGY CO.,LTD
Whatsapp：+86 159 6660 2397