Mechanical CNC 5 aixs machine center,for the fixed installation of the circuit board, the corresponding crimping parts and screws should be taken back and forth for recording.
AL5VMC3000 CNC 5 aixs machine center from China manufacturer for making die is the only means to solve the processing of impellers, blades, marine propellers, heavy-duty generator rotors, turbine rotors, large diesel engine crankshafts, etc. It is a high-tech means, which makes the impossible become possible, and all the space surfaces and special-shaped machining can be realized.
(1)Main Technical Parameters
Item | Unit | AL5VMC3000 | ||
Worktable Size | mm2 | Φ3000 | ||
Pass Width | mm | 1200 | ||
T-Slot | Width | mm | 22 | |
Distance of Spindle to worktable | Max | mm | 780 | |
Min | mm | 30 | ||
Travel | Longitude (X) | mm | 3000 | |
Lateral (Y) | mm | 1480 | ||
Vertical (Z) | mm | 750 | ||
Head (A) | ±100° | |||
Rotary Table (C) | nX360° | |||
Spindle Number | BT50 | |||
Spindle Rotation Speeds | r/min | 10-4000 | ||
Spindle Torque | Nm | 288 | ||
In Feeding Speeds | Longitude (X) | mm/min | 10-8000 | |
Lateral (Y) | mm/min | 10-8000 | ||
Vertical (Z) | mm/min | 10-4000 | ||
Head (A) | r/min | 0-7 | ||
Rotatry Table (C) | r/min | 0-5 | ||
Fast In Feeding | Longitude (X) | mm/min | 12000 | |
Lateral (Y) | mm/min | 12000 | ||
Vertical (Z) | mm/min | 6000 | ||
Head (A) | r/min | 0-9 | ||
Rotary Table (C) | r/min | 0-8 | ||
Spindle Servo Power | Kw | 30 | ||
In Feeding Servo Power | Longitude (X) | Nm | 35 | |
Lateral (Y) | Nm | 27 | ||
Vertical (Z) | Nm | 35 | ||
Head (A) | Nm | 4 | ||
Rotary Table (C) | Nm | 35 | ||
Positioning Accuracy | mm | 0.02/1000 | ||
Re-positioning(mm) | mm | 0.02 | ||
Max Worktable Load Weight | T | 6 |
(2)Machine Straightness
X:≤0.02/1100(≤0.02/1000) Y:≤0.025/1480(≤0.02/1000) Z:≤0.03/750(≤0.03/1000)
For large three-dimensional profiles, especially flat surfaces, large-diameter end mills can be used to close the surface for processing.
Precautions:
When taking out a certain circuit board from the whole machine, you should pay attention to record the corresponding position, the cable number of the connection. For the fixed installation of the circuit board, the corresponding crimping parts and screws should be taken back and forth for recording. The pressed parts should be placed in a special box to avoid loss. After assembly, all the contents of the box should be used, otherwise the assembly is incomplete.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.