AL5VMC 1000 Mechanical CNC 5-axis machining center with high efficiency and high precision, the workpiece can be assembled in one time. It can adapt to the processing of modern molds such as auto parts and aircraft structural parts. The five-axis machining center has five axes of x, y, z, a, and c. The xyz and ac axes form a five-axis linkage machining. They are good at space surface machining, profile machining, hollow machining, punching, inclined holes, and beveling.
|Distance of Spindle to worktable||Max||mm||780|
|Rotary Table (C)||nX360°|
|Spindle Rotation Speeds||r/min||10-4000|
|In Feeding Speeds||Longitude (X)||mm/min||10-8000|
|Rotatry Table (C)||r/min||0-5|
|Fast In Feeding||Longitude (X)||mm/min||12000|
|Rotary Table (C)||r/min||0-8|
|Spindle Servo Power||Kw||30|
|In Feeding Servo Power||Longitude (X)||Nm||35|
|Rotary Table (C)||Nm||35|
|Max Worktable Load Weight||T||6|
1. Keep the components cleaned
Minimize the opening of the numerical control cabinet and the door of the power cabinet. During processing, a large amount of oil mist, dust or even metal powder will be generated to prevent it from falling on the circuit board or electronic device in the numerical control system, resulting in a decrease in insulation resistance between components, or even Damage to components and boards.
2. Maintenance of the standby circuit board
When the spare printed circuit board is not used for a long time, it should be installed in the CNC system for a period of time to prevent damage.
The machining center is a high-precision compact processing equipment that integrates oil, gas, electricity and numerical control. The maintenance of each processing component should be meticulous and careful, and strictly follow the operating specifications. In this way, the various components of the machining center can be matched to each other to achieve a better processing effect.
3. Motor common brush
The brush is an important component of a DC motor and is responsible for conducting current between the rotating component and the stationary component. The transitional wear of the brush can affect the performance of the motor and even cause damage to the motor. For the machining center, the motor damage directly causes the malfunction. For this reason, if the machining center is used more frequently, the motor brushes should be regularly inspected and replaced in half a year.