Milling, boring, drilling and tapping All of these processes can be done in one setup, increasing productivity and processing quality. Centralized control by numerical control system, 5-axis linkage, AC servo drive system, rack and pinion drive system and roller linear guide.
Milling, boring, drilling and tapping All of these processes can be done in one setup, increasing productivity and processing quality. Centralized control by numerical control system, 5-axis linkage, AC servo drive system, rack and pinion drive system and roller linear guide.
(1)Main Technical Parameters
| Item | Unit | AL5VMC3000 | ||
| Worktable Size | mm2 | Φ3000 | ||
| Pass Width | mm | 1200 | ||
| T-Slot | Width | mm | 22 | |
| Distance of Spindle to worktable | Max | mm | 780 | |
| Min | mm | 30 | ||
| Travel | Longitude (X) | mm | 3000 | |
| Lateral (Y) | mm | 1480 | ||
| Vertical (Z) | mm | 750 | ||
| Head (A) | ±100° | |||
| Rotary Table (C) | nX360° | |||
| Spindle Number | BT50 | |||
| Spindle Rotation Speeds | r/min | 10-4000 | ||
| Spindle Torque | Nm | 288 | ||
| In Feeding Speeds | Longitude (X) | mm/min | 10-8000 | |
| Lateral (Y) | mm/min | 10-8000 | ||
| Vertical (Z) | mm/min | 10-4000 | ||
| Head (A) | r/min | 0-7 | ||
| Rotatry Table (C) | r/min | 0-5 | ||
| Fast In Feeding | Longitude (X) | mm/min | 12000 | |
| Lateral (Y) | mm/min | 12000 | ||
| Vertical (Z) | mm/min | 6000 | ||
| Head (A) | r/min | 0-9 | ||
| Rotary Table (C) | r/min | 0-8 | ||
| Spindle Servo Power | Kw | 30 | ||
| In Feeding Servo Power | Longitude (X) | Nm | 35 | |
| Lateral (Y) | Nm | 27 | ||
| Vertical (Z) | Nm | 35 | ||
| Head (A) | Nm | 4 | ||
| Rotary Table (C) | Nm | 35 | ||
| Positioning Accuracy | mm | 0.02/1000 | ||
| Re-positioning(mm) | mm | 0.02 | ||
| Max Worktable Load Weight | T | 6 | ||
(2)Machine Straightness
X：≤0.02/1100（≤0.02/1000） Y：≤0.025/1480（≤0.02/1000） Z：≤0.03/750（≤0.03/1000）
Designed for machining hard alloys such as stainless steel and titanium, the ALLES CNC 5-axis machine is suitable for the aerospace industry and other complex applications.
1. Keep the components cleaned
Minimize the opening of the numerical control cabinet and the door of the power cabinet. During processing, a large amount of oil mist, dust or even metal powder will be generated to prevent it from falling on the circuit board or electronic device in the numerical control system, resulting in a decrease in insulation resistance between components, or even Damage to components and boards.
2. The ventilation system is smooth
The fan is indispensable for any processing equipment that integrates oil, electricity and gas. The ventilation of the core processing part is inseparable from the participation of the fan. Regularly check that each cooling fan on the CNC cabinet is working properly and that the duct filter is clogged. If too much dust accumulates on the filter net and is not cleaned up in time, the temperature inside the CNC cabinet will be too high, which is very large damage to the machining center.
