Auto Mould C Type 3 Axis Machine Center

Auto mould C type 3 axis machine center standard speed of the spindle is 8000 rpm. The standard machine uses a high horsepower spindle motor.

Product Details

Auto mould C type 3 axis machine center

Auto mould C type 3 axis machine center standard speed of the spindle is 8000 rpm. The standard machine uses a high horsepower spindle motor. The connection between the main shaft and the motor belt greatly reduces transmission noise and heat generation. The spindle uses the G-TECH

GT-5052A dynamic balance correction device to directly correct the spindle dynamic balance on the line, so that the spindle avoids resonance when rotating at high speed, ensuring the best machining accuracy.

VIDEO

   

Auto mould C type 3 axis machine center

1.Use high-strength and tough four-claw broach, large contact surface, strong gripping force, small loss of shank and long life. 

2.The electrical box adopts the rear hanging design, which saves space and makes limited space for maximum use.

Auto mould C type 3 axis machine center

Auto mould C type 3 axis machine center

Auto mould C type 3 axis machine center

Laser Interferometer             Balance Machine                  Three Coordinates          Other Dervices

Professional quality self-testing equipment to determine the best prodncts.

Auto mould C type 3 axis machine center

The excellence of their own quality has been strongly supported by banks and governments.

Auto mould C type 3 axis machine center

Auto mould C type 3 axis machine center


ItemUnitALVMC1580
WorktableWorktable sizemm1600*800
Load capacitykg1000
T-slot (width x number x pitch)mm18x7x110
TravelX-axis travelmm1500
Y-axis travelmm800
Z axis travelmm700
SpindleDistance from spindle nose to work surfacemm185-885
Distance from spindle center to
column
mm855
Spindle speedrpm6000
Spindle taperTypeBT-50
Spindle head casing boremmφ190mm
Spindle transmission mode/Belt spindle
Automatic
tool change
Tool diameter (no adjacent tool)mmΦ115(Φ228)
Automatic
tool change
Maximum tool lengthmm350
Maximum tool weightkg15
Tool selection/Random knife selection
Knife handleTypeBT-50
Tool magazine capacityPieces24
Tool exchange method/ Knife arm
Tool exchange time (tool-to-tool)Sec2.91
RivetTypeP50-1( 45°)
Motor
capacity
Controller
Mitsubishi M80b
Spindle motor (continuous / 15
minutes)
kW15/18.5
Servo motor (X / Y / Z)kW3.0/3.0/3.0
Automatic lubrication devicew35
Cutting fluid pumpw840
battery capacitykVA35
OtherAir source pressure requirementskg/cm6
Cutting water tank capacityL400
positioning accuracymm0.02
Repeated positioning accuracymm0.01
Floor area and heightmm3550*3100*2850
Machine weightkg12000


Inquiry