CNC 3 axis machine center for metal parts adopts mobile table structure. The main parts are made of high-quality dense-baking cast iron, which has good rigidity, strong precision retention, and beautiful appearance.
CNC 3 axis machine center for metal parts adopts mobile table structure. The main parts are made of high-quality dense-baking cast iron, which has good rigidity, strong precision retention, and beautiful appearance. The main components such as the base, the column, and the saddle have passed the multi-layer inspection, which makes the machine as a whole have good thermal characteristics, good stability, high rigidity, high precision, and low vibration.
VIDEO
CNC 3 axis machine center for metal parts use high-strength and tough four-claw broach, large contact surface, strong gripping force, small loss of shank and long life. The electrical box adopts the rear hanging design, which saves space and makes limited space for maximum use.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
Item | Sub-item | Unit | ALVMC855 |
Worktable | Worktable size | mm | 1000x550 |
T-slot | mm | 18x5x90 | |
Max. load | kg | 500 | |
Travel | X axis travel | mm | 800 |
Y axis travel | mm | 550 | |
Z axis travel | mm | 550 | |
Spindle | Spindle nose to worktable | mm | 140-690 |
Spindle center to coumn face | mm | 612 | |
Spindle taper | / | BT40 | |
Spindle speed | rpm | 8000 | |
Spindle drive | / | Belt drive | |
Spindle head casing diameter | mm | φ150mm | |
ATC | ATC type | / | Arm type |
Tool capacity | pcs | 24 | |
Max. tool dia | mm | Φ80(Φ130) | |
Max. tool weight | kg | 8 | |
Max. tool length | mm | 300 | |
Tool holder | type | BT40 | |
Tool change time (T-T) | sec. | 1.8 | |
Rive | type | P40-1( 45°) | |
Tool selection | / | Random | |
Motor capacity | Controller | / | Mitsubishi M80b |
Spindle motor (continuous / 15 minutes) | kw | 7.5/11 | |
Servo motor (X/Y/Z) | kw | 1.8/1.8/3.0 | |
Automatic lubrication device | w | 35 | |
Cutting fluid pump | w | 840 | |
Battery capacity | kVA | 25 | |
Other | Air source pressure demand | kg/cm | 6 |
Cutting water tank capacity | L | 250 | |
positioning accuracy | mm | 0.01 | |
Re-positioning accuracy | mm | 0.008 | |
Floor area and height | mm | 2550*2360*2400 | |
Machine weight | kg | 5500 |