CNC spindle vertical machining center can complete milling, boring, drilling, tapping and cutting threads.
CNC spindle vertical machining center can complete milling, boring, drilling, tapping and cutting threads. After the workpiece is clamped once in the machining center, the digital control system can control the machine tool to automatically select and change tools according to different procedures, and automatically change the spindle speed, feed amount, and tool trajectory of the tool relative to the workpiece, and other auxiliary functions. Multi-process machining on several faces of the workpiece.
CNC spindle vertical machining center The workpiece is easy to clamp and position; the cutting tool's movement trajectory is easy to observe, the debugging program is easy to check and measure, and problems can be found in time to stop processing or modification; cooling conditions are easy to establish, and the cutting fluid can directly reach the tool and the machining surface; The three coordinate axes coincide with the Cartesian coordinate system. It feels intuitive and consistent with the perspective of the pattern. Chips are easily removed and dropped to avoid scratching the processed surface. Compared with the corresponding horizontal machining center, the structure is simple, the floor area is small, and the price is low.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
|Travel||X axis travel||mm||1300|
|Y axis travel||mm||750|
|Z axis travel||mm||700|
|Spindle||Spindle nose to worktable||mm||120-720|
|Spindle center to coumn face||mm||670|
|Spindle drive||/||Belt drive|
|Spindle head casing diameter||mm||φ150mm|
|ATC||ATC type||/||Arm type|
|Max. tool dia||mm||Φ80（Φ130）|
|Max. tool weight||kg||8|
|Max. tool length||mm||300|
|Tool change time (T-T)||sec.||1.8|
|Spindle motor (continuous / 15|
|Servo motor (X/Y/Z)||kw||3.0/3.0/3.0|
|Automatic lubrication device||w||20|
|Cutting fluid pump||w||840|
|X / Y axis feed motor||Nm||20|
|Z axis feed motor||Nm||27（With brake）|
|Other||Air source pressure demand||kg/cm||6|
|Cutting water tank capacity||L||200|
|Floor area and height||mm||3050*2250*2400|