Hardware structure vertical 3 axis machine center three axis motor and precision high-speed ball screw drive directly to enhance rigidity and improve precision.
Hardware structure vertical 3 axis machine center three axis motor and precision high-speed ball screw drive directly to enhance rigidity and improve precision.
Hardware structure vertical 3 axis machine center the three axis adopts linear guide rail, which has high rigidity, low noise and low friction. It can make rapid displacement and obtain the best rounding precision.
VIDEO
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
| Item | Unit | ALVMC1580 | |
| Worktable | Worktable size | mm | 1600*800 |
| Load capacity | kg | 1000 | |
| T-slot (width x number x pitch) | mm | 18x7x110 | |
| Travel | X-axis travel | mm | 1500 |
| Y-axis travel | mm | 800 | |
| Z axis travel | mm | 700 | |
| Spindle | Distance from spindle nose to work surface | mm | 185-885 |
| Distance from spindle center to column | mm | 855 | |
| Spindle speed | rpm | 6000 | |
| Spindle taper | Type | BT-50 | |
| Spindle head casing bore | mm | φ190mm | |
| Spindle transmission mode | / | Belt spindle | |
| Automatic tool change | Tool diameter (no adjacent tool) | mm | Φ115（Φ228） |
| Automatic tool change | Maximum tool length | mm | 350 |
| Maximum tool weight | kg | 15 | |
| Tool selection | / | Random knife selection | |
| Knife handle | Type | BT-50 | |
| Tool magazine capacity | Pieces | 24 | |
| Tool exchange method | / | Knife arm | |
| Tool exchange time (tool-to-tool) | Sec | 2.91 | |
| Rivet | Type | P50-1( 45°) | |
| Motor capacity | Controller | Mitsubishi M80b | |
| Spindle motor (continuous / 15 minutes) | kW | 15/18.5 | |
| Servo motor (X / Y / Z) | kW | 3.0/3.0/3.0 | |
| Automatic lubrication device | w | 35 | |
| Cutting fluid pump | w | 840 | |
| battery capacity | kVA | 35 | |
| Other | Air source pressure requirements | kg/cm | 6 |
| Cutting water tank capacity | L | 400 | |
| positioning accuracy | mm | 0.02 | |
| Repeated positioning accuracy | mm | 0.01 | |
| Floor area and height | mm | 3550*3100*2850 | |
| Machine weight | kg | 12000 | |
