The mold processing CNC boring and milling machine is a heavy cutting machine and the shaft adopts the servo motor indirect transmission mode.
Mold processing CNC gantry movable boring and milling machine,structure:
1. The Z axis is the main base of the machine tool, and a sub track is added to the left and right of the X axis. 2. The cast iron is made of Mehana.
3. The machine tool is a heavy cutting machine and the shaft adopts the servo motor indirect transmission mode.
4. Four axes of the 5 axes are output in full closed loop mode, which greatly improves the accuracy of machine positioning and repeat positioning.
5. The main shaft adopts the cooling system of hydraulic refrigeration, which can reduce the temperature rise of the spindle without high temperature and does not cause damage to the spindle bearing.
6. The Y-axis adopts the hydraulic system positioning and locking method.
Main Technical Parameters
|Control system||FANUC 0i-MD||FANUC 0i-MD|
|Max Width of Passing||mm||2400-4000||2400-4000|
|Distance from x-axis end surface to table||mm||4500|
|Spindle transmission type||BT50/BT60||BT50/BT60|
|Spindle output power||Kw||Two-speed gear box||Two-speed gear box|
|Feeding speed X/Y/Z||mm/min||10-1500/10-3000|
|Rapid traverse speed X/Y/Z||m/min||5-6000||5-6000|
|Vertical ram section||mm||2|
Mold processing CNC boring and milling machine,precision machine tools integrating mechanical, electrical, hydraulic and numerical control. The structural features are fixed beam, mobile gantry boring and milling machine, and the ram has a single oscillating head that can be adjusted at any angle.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
SHANDONG ALLES ENERGY TECHNOLOGY CO.,LYD
Whatsapp：+86 159 6660 2397