ALGMC1020D steel structure cnc milling machine,machinable space surfaces and some special parts. The portal milling machine consists of a door frame, a bed table and an electrical control system.
|Worktable||Worktable load (KG)||3000|
|Worktable size (mm)||1000*2000|
|X.Y.Z Axis||Travel (mm)||1000*2000*450（Optional）|
|X axis guide（beam）||RGW45CA2R Roller|
|Y axis guide||RGH45CA2R Roller|
|Z axis guide||RGW45CA2R Roller|
|Y axis screw||3210|
|X axis screw||3210|
|Z axis screw||3205|
|X.Y axis fast moving speed(no load)( mm/min)||8000-15000|
|Z axis fast moving speed(mm/min)||7000-10000|
|Fastest processing speed(mm/min)||6000|
|Spindle||Spindle motor power||8kw|
|Spindle motor speed（r/min）||18000|
|Spindle form||Electric spindle|
|Spindle model brand||ER32|
|Nasal end to table distance (about)(mm)||About 20-470|
|Cooling form||Water cooling|
|Machine weight (About)(T)||About 8T|
1. Battery replacement procedure
(1) Make sure the input power is turned off and the power of the replaced drive unit is turned off.
(2) Pull out the battery plug connected to the battery socket of the drive unit.
(3) Press the side of the battery with your fingertip, push the battery horizontally and remove it.
(4) The plug of the new battery is connected to the battery socket of the drive unit.
(5) Install the battery on the drive unit.
2. Warranty: 12 months
3. What brand is the CNC system?
SIEMENS system; FANUC system; Shanghai LYNUC system; Taiwan China SYNTEC system to meet your requirements.