ALGMC2116 cnc surface milling machine,milling, boring, drilling and tapping All of these processes can be done in one setup, increasing productivity and processing quality. Centralized control by numerical control system, 5-axis linkage, AC servo drive system, rack and pinion drive system and roller linear guide.
ALGMC2116 cnc surface milling machine,milling, boring, drilling and tapping All of these processes can be done in one setup, increasing productivity and processing quality. Centralized control by numerical control system, 5-axis linkage, AC servo drive system, rack and pinion drive system and roller linear guide.
Main Technical Parameters
| Item | Name | ALGMC2116 |
| Structure type | Fixed beam gantry structure | Resin sand casting |
| Gantry width(mm) | 1680 | |
| Worktable size (mm) | 1600*2000 | |
| T-slot width（mm） | 18 | |
| X.Y.Z Axis | Travel (mm) | 1600*2000*700 |
| X.Y axis fast moving speed(no load)( mm/min) | 8000-12000 | |
| Z axis fast moving speed(mm/min) | 7000-10000 | |
| Fastest processing speed(mm/min) | 6000 | |
| Positioning accuracy(mm) | ±0.01/300 | |
| Re-positioning accuracy(mm) | ±0.01 | |
| Spindle | Spindle motor power | 7.5KW Servo |
| Spindle motor speed（r/min） | 0-8000 | |
| Spindle form | Mechanical spindle | |
| Spindle model brand | BT40 | |
| Cooling form | Water cooling |
ALGMC2116 cnc surface milling machine bed is advanced and retracted, the beam is up and down, and the vertical milling head is equipped with a Taiwan ball screw, which is driven by a servo motor.
ALLES is a manufacturer of CNC machine tools and a thinker of CNC machine tools. Since its inception, ALLES has achieved rapid and stable development. ALLES products are divided into eight categories: CNC Machine Center, CNC Milling Machine, CNC Drilling Machine, CNC Boring and Milling Machine, CNC Sawing Machine, CNC Grinding Machine, CNC Punching Machine, CNC Turning and Milling Machine,,, Excavators, Forklifts And road machinery, a total of more than 130 models. Complete warehousing services and post-warranty.
1. Where is the company?
Jinan, Shandong, China
2. Battery replacement procedure
(1) Make sure the input power is turned off and the power of the replaced drive unit is turned off.
(2) Pull out the battery plug connected to the battery socket of the drive unit.
(3) Press the side of the battery with your fingertip, push the battery horizontally and remove it.
(4) The plug of the new battery is connected to the battery socket of the drive unit.
(5) Install the battery on the drive unit.
3.With timing belt and synchronous wheel;
4.Hand-held electronic handwheel unit for easy three-axis tool setting.
