Mainly composed of bed (workbench), gantry, vertical punch drill, hydraulic system, cooling system, automatic lubrication system, numerical control system, electrical control system and chip conveyor, used in power transmission and substation and communication industry.
Mainly composed of bed (workbench), gantry, vertical punch drill, hydraulic system, cooling system, automatic lubrication system, numerical control system, electrical control system and chip conveyor, used in power transmission and substation and communication industry.
Main Technical Parameters
| Model | JX0808 | JX1010 | |
| Angle size | 16Mn | L30x30x3~L80XL80X8 | L40X30X3~ L100X100X10 |
| (σb=480N/mm2) | |||
| Angle size | Q235A | ||
| (σb=400N/mm2) | |||
| Max. punching | 16Mn | Ф26×12 | Ф26×12 |
| Capability(D×T) | (σb=480N/mm2) | ||
| Max. punching capability(D×T) | Q235A | Ф26×12 | Ф26×12 |
| (σb=400N/mm2) | |||
| Punching nominal force(KN) | 600 | 600 | |
| Marking nominal(KN) | 630 | 630 | |
| Shearing nominal(KN) | Double shear:750 | Double shear:750 | |
| single shear: 1850 | single shear: 1850 | ||
| Work piece length max.(m) | 12 | 12 | |
| Workpiece feed speed(m/min) | 60 | 60 | |
| Punchers number each side | 2 | 2 | |
| Marking groups | 4 | 4 | |
| Dimension mode(mm) | Letter size14×10×19 | Letter size14×10×19 | |
| Shearing mode | Double/Single shear | Double/Single shear | |
| Axes number | 3 | 3 | |
| Programming mode | Keyboard input, USB interface input | Keyboard input, USB interface input | |
