Home > Service Center > Content

ALGMC Gantry Type Milling Machine Operating Procedures And Machine Failure Repair Methods

Jun 03, 2019

ALGMC CNC gantry milling machine gantry milling machine performance characteristics:

ALGMC CNC gantry milling machine has sufficient rigidity, high efficiency, convenient operation, simple structure and comprehensive performance. The ALGMC CNC portal milling machine produced by Alles cnc is a precision machine tool integrating mechanical, electrical, hydraulic and digital control. The structure features fixed beam, table mobile gantry milling machine, and many cuttings such as boring, milling, drilling and tapping. The function can be installed once and processed in multiple steps, which greatly improves the processing efficiency and processing quality, and has high rigidity and strength to ensure long-term stable operation.

ALGMC CNC gantry milling machine operating procedures:

1. The work should be clamped with a platen, screw or special tool. Do not use a normal wrench to add casing to avoid slipping and hurting people.

2. The tool must be clamped, otherwise it is not allowed to drive.

3. Before the work, check the operation of the transmission part of the machine tool and install the baffle of the machine to operate.

4. Milling various workpieces, especially during roughing, start slowly cutting

5. When moving the table and the tool holder, loosen the fixing screws first.

6. When loading and unloading tools, use a copper hammer or a mallet to prevent the cutter fragments from flying out and hurting people.

7. During cutting, it is not allowed to shift and adjust the tool. It is forbidden to touch or measure the workpiece by hand.

ALGMC Gantry Type Milling Machine

ALGMC CNC Gantry Milling Machine Repair

Gantry milling machine guide rail repair: Most of the machine guide rails are made of steel or cast iron. These guide rails are scratched and should be repaired, otherwise the scratches will be enlarged and even affect the machine tool. In the long-term use of machine tool guide rails and other friction pairs, due to the different degrees of friction between the two contact surfaces, the friction pair surface has different degrees of wear, which seriously affects the machining accuracy and production efficiency of the machine tool. For the repair of machine tools and other wear parts, it is usually done by metal plate and polymer material inlay or replacement, which not only requires a large number of precise processing and manufacturing, but also requires manual scraping of the machined surface, repairing many work processes, and construction period. long. Solution: The internationally advanced polymer 2211F metal repair material is used to repair the rail of the portal milling machine. It takes only a few hours to repair the scratched part of the guide rail and put it into use. Practice has proved that this method is simple to operate, saves time, has good repair quality and low cost. With its unique adhesion, excellent compressive strength, and oil and abrasion resistance, it can provide a long-lasting protective layer for components, which can effectively solve the problems that cannot be solved by large-scale equipment that cannot be dismantled due to traditional maintenance methods. The performance of the equipment is improved, the matching clearance of the components is improved, the normal operation of the production is ensured to the utmost extent, the customer saves a lot of time and funds, and provides a long-term good guarantee for the normal operation of the enterprise equipment. Repair principle: The polymer composite material is a composite material made of high-molecular polymer, metal or ceramic ultrafine powder, fiber and the like under the action of a curing agent and a curing accelerator. Various materials complement each other in performance and produce synergistic effects, so that the overall performance of the composite material is superior to the original constituent materials. With strong adhesion, mechanical properties, and chemical resistance, it is widely used in metal equipment for mechanical wear, scratches, pits, cracks, leaks, repair of sand holes, etc., as well as various chemical storage tanks. Chemical corrosion protection and repair of reaction tanks and pipelines.

More details: www.allescncmachine.com

Whatsapp: + 86-15966602397(24 hours online)