Home > Service Center > Content

ALLES CNC Shares Knowledge About Punching

May 21, 2019

1. The working table of the CNC connecting plate punching machine is a tiger-mouth type, which can be seen as a C structure. At present, there are two sizes of 1500*800 and 1500*1000, which are not suitable for processing larger workpieces, otherwise the hydraulic machine is overloaded and damages the machine.

2. The maximum punching diameter can reach 30mm, but the standard is 26mm. If the thickness exceeds 16mm, it is no longer recommended to use the punch. Otherwise, there will be a burr on the hole after processing. After the use of the workpiece, there is a great hidden danger. It is recommended to use the drill press.

ALLES CNC shares knowledge about punching

More Details: www.allescncmachine.com

TEL: +86-15966602397