Home > Service Center > Content

What should I do after CNC machine center finishes work

May 07, 2020

CNC machining is an effective way to solve the problems of many parts, small batches, complex shapes, high precision requirements, and to achieve efficient and automated processing. CNC machine center has entered our processing workshop as a model with a wide range of CNC machining applications. Due to the popularity of CNC technology, CNC machine center is no longer a mystery. The processing procedures of CNC machine tools and traditional machine tools are generally the same. The main difference is that CNC machine center completes all automatic processing by one clamping. Cutting process, so CNC machine center should carry out some "aftercare work" after finishing CNC machining.

cnc 5 axis machine center

1. Perform cleaning treatment

After the CNC machine center completes the cutting task, it should remove the chips and wipe the machine in time, and use the machine tool to maintain a clean state with the environment.

2. Inspection and replacement of accessories

First, pay attention to check the oil wiper on the guide rail, and replace it in time if it wears out. Check the status of lubricating oil and cooling fluid. If turbidity occurs, it should be replaced in time, and the water below the scale should be added.

cnc machine center

3. Shutdown procedures should be standardized

The power and the main power on the operation panel of the machine tool should be turned off in sequence. In the absence of special circumstances and special requirements, the principles of first return to zero, manual, jog, and automatic should be followed. The machining center should also run at low speed, medium speed, and then high speed. Low-speed and medium-speed operation time should not be less than 2-3 minutes before there is no abnormal situation before starting work.

4. Standardize operation and ensure safety

It is strictly forbidden to knock, correct, or correct the workpiece on the chuck or at the center of the chuck. You must confirm that the workpiece and the tool are clamped before proceeding to the next operation. The insurance and safety protection devices on the machine tool shall not be disassembled and moved arbitrarily by the operator.

The most efficient processing is actually safe processing. The operation of CNC machine center as an efficient processing equipment must be reasonably regulated when shutting down. This is not only the maintenance of the currently completed process, but also the preparation for the next start.

More details: www.allescncmachine.com

Whatsapp: + 86-15966602397(24 hours online)

E-mail: info@sdalles.com