CNC PLATE DRILLING MACHINE is a precision machine tool that combines mechanical, electrical, hydraulic and digital control. It is mainly used for the processing of flanges, heat exchangers and tube sheets. The machining process is numerically controlled, with high efficiency, high precision, convenient programming and simple operation.
In addition, CNC PLATE DRILLING MACHINE operators must strictly abide by the operating procedures and equipment daily maintenance and maintenance system, strictly operate the equipment according to the requirements of the CNC plane drilling machine manual, and try to avoid the improper use of the equipment. The following are the daily maintenance contents and requirements of CNC DRILLING AND MILLING MACHINE provided by ALLES CNC:
1. Check the oil volume of the lubricating oil tank frequently, add lubricating oil in time, and the lubricating pump can start oiling and stop in time.
2, X, Z axial guide surface to remove chips and dirt, check whether the lubricant is full, there is no scratch damage on the rail surface.
3. The compressed air source checks the pressure of the pneumatic control system and should be in the normal range.
4. The air source automatic water filter, the automatic air dryer timely cleans the water filtered out in the water separator to ensure the automatic air dryer works normally.
5. Check the balance pressure of the hydraulic balance system. The balance valve works normally when moving quickly.
6. The hydraulic system of the equipment hydraulic system and the oil pump have no abnormal noise, the pressure gauge indicates normal, the pipeline and each joint have no leakage, and the working oil and surface height are normal.
7. The cooling fan of each electrical cabinet of the electrical cabinet is working normally, and the air conditioning filter is not blocked.
8. The control system input/output device checks for looseness and the contact is firm.
9. All kinds of protective device guide rails, equipment protective covers, etc. should be free from looseness and water leakage.
10. Cool the fuel tank and water tank to check the liquid level at any time. Add oil or water in time. The cutting fluid should be added in time to avoid corrosion of the machine table.
11. Do not stack too much with the chip conveyor to avoid jamming and so on.
12. Irregular inspection of the spindle drive belt requires the adjustment of the belt tightness. If the belt is damaged, it should be replaced in time.
13. New grease is required for the bearing housing every six months.
While selling CNC machine tools to customers, ALLES CNC also trains customers to fully understand the use and maintenance of machine tools. Want to know more about CNC DRILLING MACHINE? Click on SHADONEG ALLES ENERGY TECHNOLOGY CO.,LTD, and you can look forward to your enquiry with 24 hours of online quality service.
More details: www.allescncmachine.com
Whatsapp: + 86-15966602397(24 hours online)