Home > NEWS&FAQ > Content

RTS PRODUCTS

Aug 12, 2019

ALLES CNC's RTS products include saw blades, VMC series MCHINE CENTER optical machines, sawing machines, and other parts. Look at the details in the west.


RTS产品大促销海报-2


The saw blade is a steel strip with a toothed edge and the toothed edge is the main part of the saw blade.


If the saw blade is not used immediately, it should be laid flat or suspended by the inner hole. The other saw blades should not be stacked with other objects or feet, and should be protected against moisture and rust. When the saw blade is no longer sharp and the cutting surface is rough, it must be repaired in time. Grinding does not change the original angle and destroys the dynamic balance. The inner diameter correction of the saw blade, the positioning hole processing, etc. must be performed by the factory. If the processing is poor, it will affect the product use effect, and may be dangerous. In principle, the reaming should not exceed the original aperture of 20mm, so as not to affect the balance of stress.


The VMC series MCHINE CENTER optical machine has the characteristics of high efficiency and high precision, and the workpiece can be assembled in one time. It can adapt to the processing of modern molds such as auto parts and aircraft structural parts. It is a precision machine tool that integrates mechanical, electric, hydraulic and numerical control. The feature is the comprehensive protection of the gantry type CNC machine tool center. The punch adopts a single oscillating head, and the worktable is a cnc rotary table, which can process planes, curved surfaces and holes. It not only can complete the task of mechanized machining of complex workpieces, but also can quickly improve processing efficiency and shorten the processing flow.


SAWING MACHINE is mainly composed of saw frame, bed, vertical feed device, vertical pressure device, turntable, hydraulic system, cooling system and so on. Hydraulic tensioning ensures that the saw blade maintains good tension during rapid traverse, extending blade life, allowing the user to adjust the pressure according to the steel size; it is also equipped with a cutting detection device, and if there are any bad conditions or errors, the machine will automatically Induction and stop.


Want to know more? For more information, please click on SHADONG ALLES EGERGY MACHINE CO., LTD, 24 hours online quality service is looking forward to your inquiry.


More details: www.allescncmachine.com

Whatsapp: + 86-15966602397(24 hours online)