CNC milling machines are developed on the basis of general milling machines. The processing processes of the two are basically the same and the structures are somewhat similar. CNC milling machines are divided into two categories, without a magazine and with a magazine.
1. When you enter the workshop, you must wear work clothes. The big cuffs must be fastened and the shirts must be fastened into the pants. Female students should wear safety helmets and include hair buns in their caps. Do not wear sandals, slippers, high heels, vests, skirts, and scarves to enter the workshop. Note: It is not allowed to use gloves to operate the machine;
2, be careful not to move or damage the warning signs installed on the machine;
3, be careful not to place obstacles around the machine, the working space should be large enough;
4. If a job requires two or more people to complete the work together, it should pay attention to the coordination between them.
5. It is not allowed to use compressed air to clean machine tools, electrical cabinets and NC units;
6. An internship should be performed on the designated machine tool and computer. Without permission, other machine tools, tools or electrical switches shall not be moved;