CNC drilling machine for plates panel is mainly used for machining flanges, heat exchangers and tube sheets. CNC machining, high efficiency, high precision, programming Convenient and easy to operate.
ALPZ4040 CNC drilling machine for plates panel with best quality is a precision machine tool integrating mechanical, electric, hydraulic and numerical control. It is mainly used for machining flanges, heat exchangers and tube sheets. CNC machining, high efficiency, high precision, programming Convenient and easy to operate.
|Worktable||Size of worktable (WxL)||mm||4000×4000-24000|
|Load - bearing of worktable||t/m²||7|
|Vertical ram type|
|Spindle taper hole||Morse #4|
|Max. drilling diameter||mm||Φ100|
|Drilling depth / drilling diameter||≤5(Can be controlled buy |
program if over)
|Dedicated frequency conversion motor power||kw||11Standard|
|Spindle max. torque||Nm||350Standard|
|The distance of spindle nose to worktable||mm||250-650Standard|
|Longitudinal movement of the gantry(X-axis)||Maximum travel||mm||4000-24000|
|X-axis moving speed||m/min||0-10|
|X-axis servo motor power||kw||2|
|Power head transverse movement|
|Y-axis movement speed||m/min||0-10|
|Y axis servo motor power||kw||2|
|Vertical ram feed motion |
|Z-axis moving speed||m/min||0-5|
|Z axis servo motor power||kw||2|
|Y-axis||0.08/ Full length|
|Total motor power||KW||About 40|
Cutting fluid supply overhaul
1. Clean the pump, filter, and cutting tank regularly.
2. Check the cutting fluid pipe and nozzle for unobstructed and leaking.
3. Change the cutting fluid regularly.
4. Regularly check the concentration and pH of the cutting fluid.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
SHANDONG ALLES ENERGY TECHNOLOGY CO.,LYD
Whatsapp：+86 159 6660 2397