Flat high-efficiency CNC drilling and milling machine electronic handwheel can be used for manipulation. When the first hole is set to the feed position, the remaining holes of the same type can be drilled to achieve the process of fast forward and rewind.
Flat high-efficiency CNC drilling and milling machine electronic handwheel can be used for manipulation. When the first hole is set to the feed position, the remaining holes of the same type can be drilled to achieve the process of fast forward and rewind. Therefore, a large amount of time is saved during the processing, the production efficiency is greatly improved, and the automatic breaking, chipping, pause, broken bit protection, and manual hole jumping function are also provided.
VIDEO
Main Technical Parameters
Model | ALPZ2040 | |
Workpiece size | L×W(mm) | 4000mm×2000mm one piece |
2000mm×2000mm two pieces | ||
2000mm×1000mm four pieces | ||
Material thickness of overlap | 100mm | |
Spindle | Max.drilling depth/diamter | ≤5 |
Spindle taper | Morse 4 # cone hole | |
Drilling hole diameter | Max.Φ50mm | |
Gearshift method | Inverter stepless variable speed | |
Rotation speed | 120-560r/min | |
Z axis stroke length | 500mm | |
Infeed | Hydraulic-powered feed | |
Workholding | Clamping thickness | 15-100mm |
Number of tank for clamping | 12 | |
Clamping on/lock | Foot switch | |
Clamp force | 7.5kn | |
Coolant liquid | Mode | External cooling |
Capacity | 200L | |
Hydraulic pressure | Clamping pressure | 6MPa(60kgf/cm2) |
Capacity of tank | 120L | |
Air pressure | Air source | 0.4MPa(4kgf/cm2) |
Electrical | Spindle motor | 5.5kw |
Hydraulic pump | 0.75kw | |
Cooling pump | 0.40kw | |
X axis servo system | 1.5kw | |
Y axis servo system | 1.0kw | |
Machine weight | About 12 tons |
CNC maintenance
1. Strictly observe the operating procedures and daily maintenance system;
2. Prevent dust from entering the numerical control device: floating dust and metal powder may cause the insulation resistance between components to drop, thereby causing malfunction or even damage to components;
3. Regularly clean the cooling and ventilation system of the CNC cabinet;
4. Frequently monitor the grid voltage of the CNC system: the grid voltage range is 85% to 110% of the rated value;
5. Regularly replace the memory battery;
6. Long-term maintenance of the CNC system: often powering the CNC system or running the drilling machine to run the temperature program; Maintenance of the standby board.
Laser Interferometer Balance Machine Three Coordinates Other Dervices
Professional quality self-testing equipment to determine the best prodncts.
The excellence of their own quality has been strongly supported by banks and governments.
SHANDONG ALLES ENERGY TECHNOLOGY CO.,LTD
Factory360° View:http://vr.yilanquanjing.com/shanyishukongen/
Lily
Whatsapp:+86 159 6660 2397
Email:info@sdalles.com